Exterior Care
- Wipe the flute’s exterior with a soft cloth lightly dampened with warm water only.
- Follow immediately with a dry, soft cloth to remove all moisture.
- Avoid cleaners, oils, waxes, or polishes on the exterior unless specifically recommended by the maker.
Interior Care (Flute Body Only)
- Regular interior oiling protects the wood and helps maintain a clear, consistent voice.
- Apply approximately 1 teaspoon of quality cold‑pressed olive oil into the bottom end of the flute body.
- Keep the note holes facing up so the oil flows down the chamber.
- Allow the oil to run for 10 seconds, then slowly rotate the flute, so the wood absorbs it evenly.
- Wipe away any oil that reaches the exterior with a dry cloth.
- Repeat this process every 6 months to maintain tone quality and wood health.
Areas Where Fluids Must NOT Be Applied
- Do NOT put olive oil or any other fluids into the mouthpiece hole.
- Do NOT apply fluids to the sound holes or the block area.
- Only the main flute body (the long chamber) should be oiled.
- OLIVE OIL: FLUTE BODY ONLY - NO FLUIDS IN MOUTHPIECE OR SOUND HOLES!
General Handling & Storage
- Store the flute in a dry, stable environment away from extreme heat, cold, or humidity.
- Avoid leaving the flute in vehicles, near heaters, or in direct sunlight.
- When not in use, keep the flute in a soft bag or padded case to protect it from dust and accidental damage.
- Allow the flute to dry naturally after playing before storing it.
Playing Considerations
- Moisture from breath is normal; allow the flute to air out after each session.
- If the block or nest area becomes damp, remove the block and gently wipe both surfaces with a dry cloth.
- Avoid overplaying a brand‑new flute for long periods during the first few weeks; let the wood acclimate gradually.
Long‑Term Preservation
- Maintain a regular oiling schedule to prevent the interior from drying out.
- Inspect the flute periodically for changes in feel, tone, or moisture behavior.
- Contact the maker if you notice cracks, warping, or changes in tuning.